Air-cooled Industrial Chiller

Air-cooled Industrial Chiller

Air-cooled lndustrial Chiller.Phase sequence protection for control circuit,refrigeration loop controlled by high and low pressu, it is used as a central air conditioner with high quality and reasonable price.
RCM series industrial chillers are widely used in plastic industry, foodstuff, electronic products, ultrasonics,dyeing and plating industry and so on.As for Air-cooled Chilling, the principle of heat exchange is adopted for cooling. Good quality, newly designed and easy operated chillers can accurately control various mould’s temperature, accelerate product-molding and decrease processing cycle.

                                     Air-cooled industrial chiller   RCM series

Features:
  1.cooling temperature range 5-35 centigrade temperature.
  2. High-capacity tube-in-shell evaporater with very good heat exchange performance especially under high ambient temperature condition.The heat exchange power is：15KW
  3.Tube-fin double condensers with excellent heat transfer and rapid cooling.The efficiency of condensers is 17.5KW
  4. Stainless steel warm-keeping water tank.
  5. Overload protection for compressor, pump and blower.
  6. Warm-keeping design for all piping to avoid partial convection.
  7. Independent temperature controller, anti-freeze protection.
  8. Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
  9. R22 refrigerant to be used for efficient cooling.
  10. R407 environment-friendly refrigerant is optional to use. Technical Specifications:

Model	Chilling capacity		Compressor output power (HP)	Refrigerant	Evaporator	Condenser	Blower's Power (L)	Water tank capa (KW)
	KW	Kcal /hr
RCM-3A	7.5	6500	3	R22 R407C	Tube-in- shell type	Tube-fin- shell type	45	0.75
RCM-4A	10	9000	4
RCM-5A	13.5	11500	5
RCM-8A	20	16500	8				85	1.1
RCM-10A	25.5	22000	10
RCM-12.5A	31.5	27000	12.5				150	2.2
RCM-15A	38.5	33000	15
RCM- 20A	50	44000	20				180	2.2
RCM-25A	62.5	54000	25				200
RCM-30A	77.5	66500	30				280

Model	Pump power (KW)	Pump max. pressure (kg/cm)	Outlet Tube Size	Inlet Tube Size	Dain Outlet Size	Overflowing Opening	Gross Weight (KG)	External Size for A Type W×L×H
RCM- 3A	0.75	2.0	1"×1	1"×1	1/2"	1/2"	120	750×1440×1350
RCM-4A							140
RCM-5A							170
RCM-8A	1.1		1 1/2"	1 1/2"			220	800×1600×1500
RCM-10A							280
RCM-12.5A	2.2		2"	2"			350	900×1700×1700
RCM-15A							400
RCM- 20A	2.2		2 1/2"	2 1/2"			450	1000×2800×2000
RCM-25A							550
RCM-30A							600

Please excuse for not note if some specifications of products are changed.

Note:
1) The cooling capactity is measured when the outgoing water temperature is 12℃ and ambient temperature is 30℃.
2) The refrigerant can use R407. For coding, use “N”. For example, RCM-10W-N.
3) The stardard voltage is 3, 220V/380V, 50/60Hz. We also can make it as your requirments.