Mold Automatic Temperature

Mold Automatic Temperature

Automatic Mold Temperature Controller High-efficiency and energy saving Hot medium liquid: water or oil. mould temperature controller,plastic mold temperature controller,automatic mold temperature controller,it applies high pressure.

   RTC Serices Dual-temp mold water circulation controller        RTC Serices RTC Serices Dual-temp mold oil circulation controller

Description:

Features and Application: mould temperature controller, plastic mold temperature controller, automatic mold temperature controller. It has applied high pressure, large flow imported centrifugal water pumps for different sorts of molds.
The agent spreads deeply into the mold so as to guarantee constant temperature.
The pipes have all applied stainless steel material, the pipes are smooth, erosion-proof and durable. In heating, the temperature increase speed is rather high, its cooling ability is very strong, it is high efficient and power-saving.
Temparature control has applied PID mode, temperature control is rather precise. (Max.+/-0.3), rapid and reliable so as to guaranteen stability of shaping production.
Main electrical parts are all imported so as to realize safety and stability of the machine. Delicate appearance design saves limited space, which makes it convenient to move and use.

Technical Specifications:

Model	Temp(℃)	Cooling type	Heat power (KW)	pump power (KW)	Max.flow (L/MIN)	Max.pressure (Bar)	Joints of mould (Inch)	Extermal size H×W×L(mm)	Weight (kg)
RTC-630W	120 Water	Direct cooling	6	0.5	30	3.5	3/8"(2×2)	650×300×850	60
RTC-950W			9	0.75	45	3.5	3/8"(2×2)	650×300×850	65
RTC-1290W			12	1.5	90	4	3/8"(4×2)	700×300×850	85
RTC-630W-D			6×2	0.5×2	30×2	3.5	3/8"(2×2X2)	650×600×850	100
RTC-950W-D			9×2	0.75×2	45×2	3.5	3/8"(2×2X2)	650×600×850	110
RTC-1290W-D			12×2	1.5×2	90×2	4	3/8"(4×2X2)	700×600×850	145
RTC-630	200 Oil	Indirect cooling	6	0.5	30	3.5	3/8"(2×2)	650×300×850	64
RTC-950			9	0.75	45	3.5	3/8"(2×2)	650×300×850	69
RTC-1290			12	1.5	90	4	3/8"(4×2)	800×350×850	90
RTC-630-D			6×2	0.5×2	30×2	3.5	3/8"(2×2X2)	650×600×850	110
RTC-950-D			9×2	0.75×2	45×2	3.5	3/8"(2×2X2)	650×600×850	120
RTC-1290-D			12×2	1.5×2	90×2	4	3/8"(4×2X2)	800×700×850	155

The reterence for mould automatic temperature control machine selection
Mould clamping force of plastic injection machine(T)	under 50	50-100	100-200	200-300	300-650	above 650
Molding capacity(Kg/hr)	under 6	6-12	12-25	25-40	40-80	above 80
The flow of pump(L/min)	under 30	30	30	40	60	above 100

Please excuse for not note if some specification of products are changed.

Note：
1）"D"is double section.
2） The voltage Specification Of Machine is 3∮，220V/380V，50/60Hz.
3）"W"indicate water-type controller.